HDPE drainage pipe fittings
For same floor, siphon drainage system
The floor drain is an important interface between the drainage pipe system and the indoor floor. As an important part of the drainage system in a house, its performance directly affects the quality of indoor air and is very important for the odor control in the bathroom.
The floor drain should have four characteristics: fast drainage, anti-odor, anti-blocking, and easy to clean.
Floor drain, floor drain, as the name suggests, is to drain, and the single function of floor drain is only behind the times.
The floor drain not only needs to enter the water quickly, but the most important thing is to prevent clogging. Otherwise, it will be too old to clean up and endless troubles will occur.
The main function of floor drain:
Anti-odor, anti-clog, anti-cockroach, anti-virus, anti-backwater, anti-drying (mainly refers to water-sealed floor drain)
The quality of the floor drain is mainly reviewed from four perspectives: drainage speed, deodorant effect, easy cleaning, and durability without mechanical principles.
installation
First: repair the reserved drainage holes to make them exactly match the floor drain bought back, because the reserved holes for drainage are larger when the real estate agent delivers the house. Among them, the hole diameter of the floor drain rafters should be controlled between 6-8mm, which can prevent the entry of hair, sludge, sand and other dirt;
Second: It should be grasped that the water inlet of the multi-channel floor drain is installed according to the actual situation. A multi-channel floor drain is a floor drain that can be used with a multi-function connector (to undertake face wash, bathtub, washing machine and floor drainage). This structure can solve the problem of multiple drainage uses in one sewer mouth.
Retrofit
There are generally two ways to add a floor drain where there is no floor drain: one is to raise the ground and distribute the water pipe; the other is to penetrate the floor and re-lay the water pipe.
Article No |
d1 / d2 | K | k1 | k2 |
10.24.50 | 50 (160 ± 5) | 61 | 31.6 | 5.7Ω |
10.24.56 | 56 (180 ± 5) | 61 | 31.6 | 6.8Ω |
10.24.63 | 63 (200 ± 5) | 61 | 31.6 | 8.2Ω |
10.24.75 | 75 (240 ± 5) | 61 | 31.6 | 9.0Ω |
10.24.90 | 90 (290 ± 5) | 61 | 316 | 10.9Ω |
10.24.110 | 110 (350 ± 5) | 61 | 31.6 | 13.6Ω |
10.24.125 | 125 (400 ± 5) | 61 | 31.6 | 15.2Ω |
10.24.160 | 160 (510 ± 5) | 61 | 31.6 | 20.2Ω |
10.24.200 | 200 (635 ± 5) | 61 | 31.6 | 23.8Ω |
10.24.250 | 250 (510 + 290) | |||
10.24.315 | 315 (635 + 350) |